This Single Cell System converts the rear of the 2020+ Ford PI Utility into a secure, fully contained prisoner compartment. It includes a front divider, center divider, cargo barrier (CB4), window armor, door-control covers, poly wings, and an ABS seat. The steel lower section and sweeping poly upper divider give officers clear rear visibility while keeping the prisoner fully separated. Everything mounts to OEM bolt points for a tight, stable fit built for patrol fleets.
Key Features
- Complete rear-seat prisoner transport system
- Steel + poly center divider with high-visibility upper section
- Front divider with built-in HSEP for added foot room
- CB4 cargo barrier keeps equipment from entering the cell
- Passenger-side window armor + door control cover included
- ABS one-piece seat for fast cleaning and biohazard control
- Uses OEM bolt points—no major cutting or cabin alteration
- Designed for daily patrol, high-risk transport, and fleet durability
| System Components | Compatibility |
|---|---|
| Front Divider (steel lower + poly upper) with HSEP | Ford Police Interceptor Utility — 2020+ |
Specification:
-
System Components:
- Front Divider (steel lower + poly upper) with HSEP
- Lower Steel Center Divider
- Upper Poly Center Divider
- Center Stiffener Tubes
- Tube Brackets
- Cargo Barrier (CB4)
- Side Poly Wings
- B-Pillar Bracket
- Mounting Feet (inside/outside)
- ABS Seat + seat belt retainers
- Door-side window armor + door-control covers
- Hardware kit
-
Material:
- Powder-coated steel (lower dividers, barrier, brackets)
- Clear polycarbonate (upper center divider)
- ABS molded seat & poly wings
-
Design Highlights:
- Upper divider “sweeps” downward for improved officer visibility (page 1 image)
- Lower steel divider wraps onto backbone supports for rigidity (page 5 image)
- CB4 mounts to OEM flooring and cross-brace bolts (pages 2–3)
- ABS seat integrates with center divider & cargo barrier (page 6)
-
Cleaning:
- ABS seat cleans with mild soap + water
- Polycarbonate panels: use non-abrasive cleaners only
Compatibility
- Ford Police Interceptor Utility — 2020+
-
Works with:
- OEM rear-seat bolt pattern
- OEM cross-tube & floor brace
- Factory interior trim (minimal trimming noted on page 4)
- CB4 cargo barrier (included in this system)
-
Not compatible with:
- Civilian Ford Explorer
- Vehicles without factory PIU interior geometry
Single Cell – Prisoner Transport System (Ford PI Utility 2020+)
Description
This Single Cell System converts the rear of the 2020+ Ford PI Utility into a secure, fully contained prisoner compartment. It includes a front divider, center divider, cargo barrier (CB4), window armor, door-control covers, poly wings, and an ABS seat. The steel lower section and sweeping poly upper divider give officers clear rear visibility while keeping the prisoner fully separated. Everything mounts to OEM bolt points for a tight, stable fit built for patrol fleets.
Key Features
- Complete rear-seat prisoner transport system
- Steel + poly center divider with high-visibility upper section
- Front divider with built-in HSEP for added foot room
- CB4 cargo barrier keeps equipment from entering the cell
- Passenger-side window armor + door control cover included
- ABS one-piece seat for fast cleaning and biohazard control
- Uses OEM bolt points—no major cutting or cabin alteration
- Designed for daily patrol, high-risk transport, and fleet durability
Specifications & Compatibility
| System Components | Compatibility |
|---|---|
| Front Divider (steel lower + poly upper) with HSEP | Ford Police Interceptor Utility — 2020+ |
Specification:
-
System Components:
- Front Divider (steel lower + poly upper) with HSEP
- Lower Steel Center Divider
- Upper Poly Center Divider
- Center Stiffener Tubes
- Tube Brackets
- Cargo Barrier (CB4)
- Side Poly Wings
- B-Pillar Bracket
- Mounting Feet (inside/outside)
- ABS Seat + seat belt retainers
- Door-side window armor + door-control covers
- Hardware kit
-
Material:
- Powder-coated steel (lower dividers, barrier, brackets)
- Clear polycarbonate (upper center divider)
- ABS molded seat & poly wings
-
Design Highlights:
- Upper divider “sweeps” downward for improved officer visibility (page 1 image)
- Lower steel divider wraps onto backbone supports for rigidity (page 5 image)
- CB4 mounts to OEM flooring and cross-brace bolts (pages 2–3)
- ABS seat integrates with center divider & cargo barrier (page 6)
-
Cleaning:
- ABS seat cleans with mild soap + water
- Polycarbonate panels: use non-abrasive cleaners only
Compatibility
- Ford Police Interceptor Utility — 2020+
-
Works with:
- OEM rear-seat bolt pattern
- OEM cross-tube & floor brace
- Factory interior trim (minimal trimming noted on page 4)
- CB4 cargo barrier (included in this system)
-
Not compatible with:
- Civilian Ford Explorer
- Vehicles without factory PIU interior geometry
Download Additional Info
